Exterior Window Trim aka Brick Molding

by Good Millwork on March 16, 2010

in Exterior Moldings

Whether you want to match, replace or select exterior window trim, knowing the proper terminology makes it easier to request what you need:

  • Exterior window and door trim is called brick molding
  • Interior door and window trim is called case molding
BrickMolding Exterior Window Trim aka Brick Molding

Exterior Door Molding aka Brick Molding ~ Photo Credit Joe Mehaffey

Improper installation and failure to protect the wood on all sides before installing it often leads to water damage that rots wooden window and door trim as you can see in these photos.

Many contractors use soft woods like fir or pine which are less resistant to water damage, rot and mold than hardwoods.

Have Questions About the Best Type of Wood to Use?
Contact us or call (888) 209-9307 ~ We are happy to assist.

What type of wood you select and how it installed can make your window trim last many times longer. Spending a little more can save you much more in the long run.

rottedwindowsill Exterior Window Trim aka Brick Molding

Water Damage Can Cause Window Sills to Rot ~ Photo Credit Handyman Nuts and Bolts ~ How to Prevent and Repair Wood Rot Damage

How to Use Our Molding Search Tool
To begin a molding search, use the drop down menu (change “Crown” to Brick Moulds) to select the type of molding. To see all available moldings in all sizes simply click “Start Search”. You can narrow the selection by entering dimensions in the fields.

Not sure what width, thickness or height or projection to enter? Call us at (888) 209-9307 – or contact us.
Love to do your own home improvements? See the links at the bottom of this page for do it yourself tips for installing Window Moldings.
If you would  prefer to hire a qualified installer you can use StartRemodeling‘s free contractor search to FIND a LOCAL REMODELING CONTRACTOR.

DIY Tips for Intalling Window Moldings:

 Exterior Window Trim aka Brick Molding
pixel Exterior Window Trim aka Brick Molding
lg share en Exterior Window Trim aka Brick Molding

Stay In The Loop!

Subscribe to the Good Millwork feed via RSS or Email to receive notifications when new posts are published. Follow Good Millwork on Twitter too!

{ 11 comments… read them below or add one }

dave from brick cleaning July 6, 2010 at 4:21 am

We are in the process of replacing all our rotten timber windows with composite ones. The beauty of composites is it is a timber trim internally but aluminium externally. Best of both worlds!
dave@brick cleaning´s last [type] ..The Advantages Of Dry Cleaning

Reply

alex January 27, 2011 at 1:09 pm

we had our windows re-done a couple of years back, we looked at composite at the time but ended up with upvc… not sure why.
alex´s last [type] ..Glazier Doncaster

Reply

Diana from Diet Health Research August 11, 2010 at 10:12 pm

Thanks for the reference. I am planning to have the house renovated and this will really help a lot.
Diana@ Diet Health Research´s last [type] ..Which Is Best For Weight Loss

Reply

tabitha from builders merchants September 7, 2010 at 10:14 am

My dad is trying to redecorate my room and he#s a little bit unsure of which exterior trim to use. Obviously we get quite a lot of rain and stuff so we want to be able to go with something that will last a long time in poor weather. I personally didn’t know there was a difference in terminology so this will help when I start researching what is best.

Reply

Christopher from Screen Doors September 20, 2010 at 3:10 am

Hmm! This is good advice, though I must say the photograph of the door and surrounds is nasty and a job that I would not want to tackle.

Reply

stork club September 22, 2010 at 11:20 am

Twitter: @storkclubny

that part of the window really gets chipped and rotten especially if it constantly rains like where I am from..i replaced mine months ago with your product..it worked out well

Reply

Prorax November 10, 2010 at 11:41 pm

Prorax offers Window cleaning Sydney, Pressure cleaning Sydney, Cleaning Sydney, Cleaning services Sydney, Commercial cleaning Sydney, Commercial maintenance Sydney contact us 1800 040 117.

Reply

Matt from upvc windows November 11, 2010 at 10:01 pm

Any halfway decent professional will be an assurance that these kind of slovenly installations don’t happen. Your window installation should be guaranteed against this kind of foreseeable damage. The best advice? Stay away from wood altogether! There are plenty of plastic and composite alternatives for wood that are visibly indistinguishable and provide unmatchable insulating and weatherproofing qualities.

Reply

Rusty from Flooring Kingwood February 9, 2011 at 7:30 pm

Good to know. That window does look quite bad, seems like it need an exterior window trim or the need to be replaced by a new one. That’s why it’s good to think about choosing a long lasting wood material before the installation.

Reply

Nick from Composite Doors February 28, 2011 at 7:56 am

I wish I had found reference material like this 3 years ago. I ended up with a UPVC finish instead of the imitation wood we were looking for. As Matt (above) states; both offer great protection from the elements, but due to poor knowledge we didn’t get the look we wanted. Suppose the moral is to read more articles like this.

Reply

Matt from Carpet Flooring Alexandria VA March 24, 2011 at 9:09 pm

There are various anti-rot ‘eco’ wood available now specifically to tackle water damage, although much like everything else, maintenance is necessary every now and then no matter now anti-rot a material claims to be.

Reply

Leave a Comment

CommentLuv badge

This site uses KeywordLuv. Enter YourName@YourKeywords in the Name field to take advantage.

Previous post:

Next post: